Two Colours Classic Broad Stripe fabric*
Two Colours Classic Broad Stripe fabric*
Couldn't load pickup availability
The broad stripe is an absolute classic in interiors schemes.
I have included here the pink stripe printed onto a white cloth creating a pink and white stripe and also the pink stripe printed onto a natural undyed cloth which creates a slightly softer effect.
This design is a good candidate for bespoke colourways. Bespoke cloth costs the same per meter as the main range. To find out more about the process, please visit: Bespoke colouring.
Design repeat
Horizontal: 10 cm (each stripe is 5 cm wide)
Vertical: Continuous
Share
As all computer screens can differ, the colour you see may not be an accurate representation of the fabric. Please order a physical sample before placing a bulk order to make sure that the design is in the correct colour for your project.
Collapsible content
Medium weight - Natural cotton linen mix fabric
This is a beautiful unbleached plain weave fabric. It has linen 'slubs' which give it some texture. It is suited to blinds, curtains, cushions and pelmets, bed valences and light/occasional use upholstery (not for heavy traffic areas).
Fibre content: 94% cotton 6% linen, 228gsm, usable printed width 135cm.
Care: Wash on cool cycle 30oC and delicate tumble dry on low heat. Iron on a medium heat (2 dot iron). Do not bleach and do not dry clean.
This fabric is digitally printed with OEKO-TEX Eco Passport Certified water based pigment Inks (NEP 1612). These inks work well in situations where they are exposed to natural sunlight as they are inherently UV resistant. The inks are 'Ecocert' certified ink which means it is independently checked to ensure they have been made in an environmentally and socially responsible way.
The fabric is sourced through the Better Cotton Initiative. It is woven in Pakistan and printed in the UK.
If this fabric is required for commercial projects, you may need to consider an appropriate treatment as cotton/linen is not inherently flame retardant.
** Important - the width and height of the print pattern is noted on each design page - some fabrics are wider than others. The design will be repeated horizantally across the fabric but may finish part way through the pattern. Please bear this in mind if you are planning to join the pieces horizontally.
Please read the accepted fault tolerances notes from our printers in the drop down section below.
Medium weight - White cotton linen mix fabric
This is a beautiful white plain weave fabric. It has linen 'slubs' which give it some texture. It is suited to blinds, curtains, cushions and pelmets, bed valences and light/occasional use upholstery (not for heavy traffic areas).
Fibre content: 94% cotton 6% linen, 228gsm, usable printed width 135cm.
Care: Wash on cool cycle 30oC and delicate tumble dry on low heat. Iron on a medium heat (2 dot iron). Do not bleach and do not dry clean.
This fabric is digitally printed with OEKO-TEX Eco Passport Certified water based pigment Inks (NEP 1612). These inks work well in situations where they are exposed to natural sunlight as they are inherently UV resistant. The inks are 'Ecocert' certified ink which means it is independently checked to ensure they have been made in an environmentally and socially responsible way.
The fabric is sourced through the Better Cotton Initiative. It is woven in Pakistan and printed in the UK.
If this fabric is required for commercial projects, you may need to consider an appropriate treatment as cotton/linen is not inherently flame retardant.
** Important - the width and height of the print pattern is noted on each design page - some fabrics are wider than others. The design will be repeated horizantally across the fabric but may finish part way through the pattern. Please bear this in mind if you are planning to join the pieces horizontally.
Please read the accepted fault tolerances notes from our printers in the drop down section below.
Fabric fault and printing tolerances
These are the tolerances that our printers work to. It is assumed that you find them acceptable when you proceed with an order:
Dimensions
Fabrics are printed with a tolerance of +/- 0.1mm but environmental factors can shrink or expand fabric after printing. Fabric is considered acceptable if the printed area is accurate within +/- 2%
Faults
Fabrics are inherently susceptible to faults such as loose fibres and surface variation. Fabric is considered acceptable if the printed area contains:
- No more than 5 faults measuring less than 1mm per linear metre
- No more than 1 fault measuring up to 3mm per linear metre
- No faults measuring over 3mm
Unprinted Areas
Faults outside the printed area are considered acceptable.
Reverse
Faults on the reverse of the printed side of the fabric are considered acceptable unless visible from front.
Meta Data
Every order is printed with meta data so we can identify the fabric and process your order. This is printed outside the printed area and considered acceptable.
Delivery
Samples from the main range:
Most samples are printed to order. You should receive them in 1-2 weeks. They will usually be posted by Royal Mail. Delivery is charged at £4.50.
Fabric by the meter from the range of existing colourways:
The fabric is printed to order. I don't hold stock of fabric which reduces waste. It should be with you within 2 weeks. If there are any unexpected delays, I will, of course, let you know by email.
Orders of 1-2 meters will be folded and sent by Royal Mail. The cost is £6.50
Orders of 3 meters or more will be delivered on a roll and will either be delivered by DPD courier or Parcelforce. The cost is £18.
Bespoke colouring work:
Time frames and delivery costs are the same as the range of existing colourways.
United KIngdom only
I am afraid I currently do not ship outside of the United Kingdom.
Returns
