Woodland Anenome Leafy Fabric

Inspired by the beautiful clumps of woodland anemomes that appear beneath the trees in the spring. The flowers flutter gently in the breeze and always make me smile.

Personalise any (or all) of the 4 colours in this all over leaf design. It is designed to have a slightly watercolour effect so the colour of some of the leaves will be affected by the colour of the background that you choose. The effect is reproduced in the visualiser so that you can see how it will look. The repeat varies depending on the fabric in order to make best use of the printable width:

Cotton (printed area 145cm wide): 22.3cm horizontal repeat. Vertical repeat 27.4cm

Cotton Linen mix (printed area 135cm wide) : 24cm cm horizontal repeat Vertical repeat 29.5cm

Cotton Denim (printed area 150cm wide) 24.5cm horizontal repeat Vertical repeat 30.2cm

Bespoke samples take around 10 days.

Current colour selection

This mock-up will give you an idea of the colours, but please order a physical sample before ordering larger quantities. For a colour palette printed onto fabric, please visit the colour palettes tab in the main menu at the top of the page.

Choose Your Colours

Click on the colours below to preview your design instantly on screen. Interior decorators may enter custom codes in the boxes below.

Background Loading...

Custom code (for decorators):

Primary Loading...

Custom code (for decorators):

Secondary Loading...

Custom code (for decorators):

Accent Loading...

Custom code (for decorators):

Choose Fabric

Choose Size

Important information:

Cotton fabric

This lovely medium weight, half panama weave cotton is perfect for many interior projects including blinds, cushions, curtains and bed valances. The print pattern looks clean and crisp. It is digially printed with pigment inks which have excellent light fast qualities.

Fibre content 100% cotton. 220gsm. Usable printed fabric width 145cm. Woven and finished in Pakistan, and printed in the UK.

Care: Wash on a regular machine cycle at 30 °C / 85F. Delicate tumble cycle on a low heat. Iron on a medium heat using steam, ironing print side down for best results. Do not bleach. Do not dry clean. Do not wring.

Please read the accepted fault tolerances notes from our printers in the drop down section below.

Cotton linen mix fabric

This is a beautiful white plain weave fabric. It has linen slubs which give it some texture. It is suited to blinds, curtains, cushions and pelmets, bed valences and light/occasional use upholstery (not for heavy traffic areas).

Fibre content: 94% cotton 6% linen, 228gsm, usable printed width 135cm.

Care: Wash on cool cycle 30oC and delicate tumble dry on low heat. Iron on a medium heat (2 dot iron). Do not bleach and do not dry clean.

This fabric is digitally printed with OEKO-TEX Eco Passport Certified water based pigment Inks (NEP 1612). These inks work well in situations where they are exposed to natural sunlight as they are inherently UV resistant. The inks are 'Ecocert' certified ink which means it is independently checked to ensure they have been made in an environmentally and socially responsible way.

The fabric is sourced through the Better Cotton Initiative. It is woven in Pakistan and printed in the UK.

If this fabric is required for commercial projects, you may need to consider an appropriate treatment as cotton/linen is not inherently flame retardant.

** Important Please read the accepted tolerances notes from our printers in the drop down section below.

Cotton denim fabric

This heavyweight cotton fabric is suitable for soft furnisings and upholstery. It is a denim weave which means there is a visible diagonal texture.

Fibre content: 100% cotton. Useable printed width 150cm. 393 g/sm.

Care: Wash on a delicate machine cycle at 30 °C / 85F. Do not tumble dry. Iron on a medium heat using steam, ironing print side down for best results. Do not bleach. Do not dry clean. Please note some shrinkage may occur after washing.

Please read the accepted fault tolerances notes from our printers in the drop down section below.

Fabric fault and printing tolerances

These are the tolerances that our printers work to. It is assumed that you find them acceptable when you proceed with an order:

Dimensions

Fabrics are printed with a tolerance of +/-0.1mm but environmental factors can shrink or expand fabric after printing.
Fabric is considered acceptable if the printed area is accurate within +/- 2%

Faults

Fabrics are inherently susceptible to faults
such as loose fibres and surface variation. Fabric is considered acceptable if
the printed area contains:

No more than 5 faults measuring less than 1mm per linear metre
No more than 1 fault measuring up to 3mm per linear metre
No faults measuring over 3mm

Unprinted
Areas

Faults outside the printed area are considered
acceptable.

Reverse

Faults on the reverse of the printed side of
the fabric are considered acceptable unless visible from front.

Meta Data

Every order is printed with meta data so we
can identify the fabric and process your order. This is printed outside the
printed area and considered acceptable.

Shade Variation:

Please remember that cotton is a natural product and very slight shade variations can occur. These should not cause a problem for your project but please ensure that you order the full quantity of fabric for your project in one go so that the printers can ensure good colour consistency.
My printers currently print pieces up to a maximum of 10 meters in length but
will ensure good colour matching between pieces in the same order.

Delivery

Bespoke samples:
Samples are printed to order. You should receive them in 1-2 weeks. They will be posted by Royal Mail and the delivery charge is £1 up to an order value of £85 after which the delivery charge will be £5.

Bespoke fabric length:
The fabric is printed to order. It should be with you within 2 weeks. If there are any unexpected delays, I will, of course, let you know by email.
Orders of 1-2 meters will be folded and sent by Royal Mail and the delivery charge is £5. For orders of 3 meters or more, you have a choice. If you would like it delivered on a roll (by DHL courier or Parcelforce) the delivery charge will be £18. If you would like it folded and delivered in a poly bag, the charge will be £5 for orders up to the value of £1500. For orders which are more than £1500, they will be delivered on a roll(s) and the charge will be £18.

United KIngdom only

I am afraid I currently do not ship outside of the United Kingdom.

Returns

We will refund or replace goods which are faulty. As all items are printed especially for you, we can not accept them back unless there is a fault.

Natural flaws in the fabric such as slubs in the weave are not considered defects. Our fabric printers are proud of their colour accuracy but the depth of colour between print runs may vary slightly due to the natural fibres in the fabrics and this is not considered a defect. Please order enough fabric in one go to finish your project to avoid this problem.

Please inspect your order upon receipt. Please notify us immediately or within 21 days of receipt, of a problem (do not cut into the fabric as this will invalidate your claim).

To request a return, you can contact me at henrietta@fromthehenhouse.co.uk. Please quote the order number and give details of the fault (attach photos where relevent).

If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at henrietta@fromthehenhouse.co.uk.

Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund.
If more than 15 business days have passed since we’ve approved your return, please contact us at henrietta@fromthehenhouse.co.uk.